Technician holding a diagnostic scan tool connected under the hood

ADAS · Palo Alto, CA

ADAS Recalibration in Palo Alto, CA

Superior Auto Glass LLC recalibrates forward cameras and driver-assist sensors for Palo Alto drivers after a windshield replacement, alignment or minor collision. We follow the procedure your vehicle's manufacturer specifies and scan the system before and after.

  • Palo Alto 94301, 94303, 94304, 94306
  • 20 years of experience
  • We will come to you at no additional cost!

ADAS Recalibration in Palo Alto

What Palo Alto drivers should know

Tech-heavy cars, tech-heavy streets

From Stanford to Stanford Research Park, Palo Alto drivers rely on lane-keeping, adaptive cruise and automatic braking. Those systems only work as designed when the camera is aimed exactly where the manufacturer intends.

Static or dynamic, by the book

Some vehicles calibrate with targets while parked, some on a road drive, and some need both. For dynamic drives, clearly marked roads like Page Mill Road, Oregon Expressway or I-280 near Palo Alto can meet the manufacturer's conditions.

Not just after glass

Calibration can also be needed after a wheel alignment, suspension work or a fender-bender that moves a sensor. Call us with what was done and we'll tell you whether your car needs it.

Technician holding a diagnostic scan tool connected under the hood

Technician holding a diagnostic scan tool connected under the hood

ADAS Recalibration services we offer in Palo Alto

Recalibration of the forward camera and related driver-assist sensors after windshield replacement, a suspension or alignment change, or a minor collision, so lane-keeping and automatic braking see the road correctly.

  • Forward-facing camera recalibration after windshield replacement
  • Calibration following the manufacturer's static, dynamic or combined procedure
  • Pre- and post-scan of driver-assist system fault codes
  • Check of lane departure, lane-keeping and forward collision warnings
  • Written confirmation that the calibration was completed

Static vs. dynamic calibration

Static Dynamic
Where it happens Vehicle parked with targets set at measured distances On the road while driving
What it needs Level surface, space and calibration targets Clear lane markings and the speed and distance the manufacturer sets
Who decides The vehicle manufacturer The vehicle manufacturer
Some vehicles Need a static calibration first Then a dynamic drive to finish

Our ADAS process

  1. 1

    Confirm the procedure

    We look up which calibration your vehicle's manufacturer requires.

  2. 2

    Pre-scan

    We scan for driver-assist fault codes before starting.

  3. 3

    Calibrate

    Static targets, a road drive, or both, depending on the vehicle.

  4. 4

    Post-scan

    We clear and recheck codes to confirm the system reports ready.

  5. 5

    Document

    You get confirmation of the work for your records or insurer.

ADAS Recalibration in Palo Alto: FAQ

How long does ADAS recalibration take in Palo Alto?

It depends on the vehicle and whether it needs static, dynamic or both procedures. We give you a time estimate when we confirm your vehicle's procedure.

What happens if I skip recalibration?

A misaimed camera can misread lane lines or distance, so warnings and automatic braking may not work as designed. Many vehicles also show a warning light until the calibration is done.

Do you give proof of calibration?

Yes, we confirm the calibration was completed so you have a record for yourself or your insurer.

Need ADAS Recalibration in Palo Alto?

Superior Auto Glass LLC handles ADAS Recalibration across Palo Alto and nearby cities, with mobile service that comes to you.

logo
Superior Auto Glass LLCTypically replies in minutes
Superior Auto Glass LLC
Hi there 👋
How can we help you?